Lacquer Finishes

Once your floor has been sanded back to bare wood, choosing the right finish is what determines how it will look and perform long term. This is where a lot of people get stuck — because the options can seem confusing. In reality, most floors are finished with either lacquer or hardwax oil, and each has its place depending on how the room is used. The Two Main Options After sanding, your floor will typically be finished with either: Lacquer (a sealed protective coating) Hardwa

This oak floor repair and sanding project in Doncaster involved stabilising damaged boards before restoring the surface. After careful preparation and professional dust-controlled sanding, the floor was sealed using a Nordic lacquer system to achieve a lighter, contemporary finish with long-lasting protection. Introduction This oak floor in Doncaster required repair before sanding could begin. Several areas had suffered surface damage and wear over time, affecting both the ap

We recently restored a very old parquet floor in Doncaster that had been completely hidden under rubble and debris. Once cleared, the original timber blocks were revealed but were heavily worn, uneven and damaged from years of neglect. Older parquet floors require careful assessment before sanding, as excessive removal can permanently affect the pattern and lifespan of the floor. The Sanding Process Using professional dust-controlled sanding equipment, we carefully levelled t

This teak parquet floor restoration project in Lincoln involved carefully sanding back the existing finish to reveal the natural character of the timber beneath. Teak parquet blocks require a controlled and methodical approach to ensure the pattern remains crisp and the surface is level throughout. Using professional dust-controlled sanding equipment, the floor was gradually refinished through multiple abrasive stages. Edges and corners were detailed by hand to maintain cons

Restoring parquet flooring requires precision, patience and the correct finishing system. This recent project in Hull involved sanding a traditional herringbone parquet floor and sealing it with a durable professional lacquer for long-term protection and a clean, even finish. The Sanding Process We began by carefully sanding the parquet floor using advanced dust-controlled equipment. Parquet floors require a controlled and even sanding process to preserve the pattern while re

We recently completed an engineered oak floor sanding project in Lincoln, restoring a worn surface and refinishing it with a modern Nordic lacquer system. The floor had become scratched and dull over time, particularly in high-traffic areas. While engineered flooring has a thinner wear layer than solid wood, it can often be professionally sanded and restored when assessed and carried out correctly. The Condition Before Sanding The engineered oak floor showed surface scratchin

We recently completed a full parquet floor sanding project in Lincoln for a homeowner looking to restore the original character of their timber flooring. Over time, the surface had become scratched, dull and heavily worn in the main walkways, with the previous finish no longer offering proper protection. Parquet flooring is a standout feature in many Lincoln properties, but it requires careful and controlled sanding to preserve the block pattern and achieve a smooth, even res

Introduction This recent oak parquet floor restoration project in Gainsborough involved sanding and refinishing a worn surface that had become dull and uneven over time. Regular foot traffic and previous finishes had reduced the natural depth and clarity of the timber. Professional Sanding Process Parquet flooring requires a controlled sanding process to preserve the pattern and maintain an even surface. The floor was carefully prepared using professional sanding equipment, r

Introduction This recent pine floor sanding project in Scunthorpe involved restoring a worn and heavily marked timber floor back to a smooth, even finish. Pine flooring is softer than hardwood, meaning it can show scratches, dents and general wear more easily over time. Preparing & Sanding Pine Flooring Pine floors require a careful sanding process to avoid over-sanding softer areas of the timber. The surface was prepared using professional sanding equipment, removing old fin

This oak parquet floor sanding project in Doncaster involved restoring a worn and tired surface back to a smooth, durable finish. Over time, the original coating had become dull and marked, leaving the floor looking lifeless. Through careful preparation and professional sanding, the natural character of the parquet was brought back to life. T he Condition Before Sanding The parquet floor showed visible signs of wear, surface scratches and uneven sheen where the previous finis

If your oak floor is looking worn, dull or scratched, professional sanding can completely transform it. This oak floor restoration in Hull shows the full process — from removing the old coating to the final sealed finish. The Condition Before Sanding The oak floor had a tired, worn finish with visible surface scratches and dull areas where the original coating had broken down. Although the boards themselves were structurally sound, the surface no longer reflected the natural

local wood restoration company can make all the difference. Based in North Lincolnshire, Marcus offers expert sanding and finishing service

Wood floors are not just a practical choice for homeowners they also add warmth and beauty to any space. However, with the passage of time, even the most stunning floors can lose their luster. Here we have a maple wood floor which the old protection has failed One half of a beautiful wood floor is freshly sanded, revealing the rich, natural grain, while the other half still bears the worn-out old coating. This striking contrast serves as a reminder of why investing in sanding